EXT-COMPAUD-CAT5-142

1:2 Component Audio over CAT5

EXT-COMPAUD-CAT5-142


Features:

The 1:2 Component Audio over CAT5 extends and duplicates your audio and component video signals at distances of up to 300 m away. Remote AV signals are received from the 1:2 Component Audio over CAT5 Sender unit, via industry-standard CAT5 network cables.

The 1:2 Component Audio over CAT5 will extend Analog Component as well as Analog Audio or Digital Audio via S/PDIF or TOSlink and provide two full sets of AV signal output on the receiving end. Audio is transmitted digitally over the CAT-5 cable and both the analog and digital audio outputs are active on the receiver side.

Note: Both analog and digital audio outputs are active on the receiver side when two-channel analog audio is used. If multi-channel digital audio is used, then the analog audio outputs will be inactive.

Supports up to 1080p component video
Supports analog L+R audio and multichannel digital audio via optical Toslink or S/PDIF jacks
Equalizations for different CAT-5 skews
No loss of quality over long distances


Tech. Spec.:

Video Amplifier Bandwidth: 350 MHz
Input Video Signal: 1.2 Volts p-p
Input Sync Signal: 5 Volts p-p (TTL)
Horizontal Frequency Range: 15-70 KHz
Vertical Frequency Range: 30-170 Hz
Video In/Out: 6 RCA component
Audio In/Out: 4 RCA Audio, 2 SPDIF, 2 TOSlink
Link Connector: RJ-45 Shielded
Power Supply: 5V DC
Power Consumption Sender: 5 Watts max.
Power Consumption Receiver: 5 Watts max.
Shipping Weight: 2,3 kg


Package includes:

1x Component Audio Over CAT5 Sender
1x 1:2 Component Audio Over CAT5 Receiver
1x 2 m 5 RCA Component Video Cable
2x 5V DC Power Supply
1x User?s Manual