EXT-HDMI1.3-CAT6-8X

8x CAT6 Extender for HDMI

EXT-HDMI1.3-CAT6-8X


Features:

The Gefen 8x CAT6 Extender for HDMI is a companion product for any 4X4 Matrix for HDMI solution. It takes Hi-Def sources routed by the Matrix to any eight extended HDTV displays up to 60 meters away. This HDMI product supports a variety of HDMI 1.3 features including: Deep Color, Multi-Channel Audio, Lip-Sync, CEC controls and 3DTV. Additional features include an extension for IR Remote for AV source control from the remote locations, IP Control and RS232 control for overall system routing and management.

The Gefen 8x CAT6 Extender for HDMI supports the HDMI 1.3 specification with features like 1080P Full HD, and compressed lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio. The CAT6 Extender's pure digital transmission method insures 100% signal integrity over a single cable extension solution.

The product can be connected in two ways:

1) When used as an add-on extension to HDMI when the system uses any 8X8 Matrix system as the required solution. In this case simply connect a CAT-6 cable between the Sender unit and Receiver units for each zone (room).

2) The unit's other purpose is to extend four (8) separate HDMI signals at long-range (60 meters) over CAT-6 cable to any HDTV display. Optionally, IR signals can also be extended, adding remote control of any IR functionality located at the source end.

An optional IR remote control can be used at the Sender to control the routing or at each Receiver to control each individual zone. Additional control is possible via any HTTP-Compliant Web Browser (IP Control) or by using RS232 control. The Sender unit also has a unique feature that can apply control to the IP control and RS232 control of the 8x8 HDMI 1.3 matrixes: simply connect the supplied RS232 cable to the Matrix's RS232 input and the 8x CAT6 Extender for the HDMI Sender unit's RS232 output.

HDMI 1.3 Features Supported:

- Dolby TrueHD & DTS-HD Master Audio
- Deep Color Supported (x.v.Color)
- 225 MHz (up to 12 bit YUV 444 @ 1080p)
- CEC Protocol Pass-Through
- Lip-Sync Pass-Through
- 3DTV Pass Through


This product is an HDCP pass-through device.

- Video Resolutions: 1920 x 1200, 1080p, and 2K
- IR signal Extension
- IR Remote using a single CAT-6A cable for each zone (room)
- Remote control via either IP control and/or RS-232 serial control
- Audio and video are transmitted digitally over one CAT-6A cable for zero signal loss
- HDCP Compliant


Tech. Spec.:

Video Amplifier Bandwidth: 225 MHz
Input Video Signal: 1.2 V p-p
Input DDC Signal: 5V p-p (TTL)
Maximum Video Resolution: 1080p / 1920 x 1200
HDMI Connector: Type A 19-pin
Link Connector: RJ-45 Shielded
Power Indicator (Sender / Receiver): LED (red)
Source Indicators (Receiver): LED (blue)
RS-232 Interface (Sender): 1x DB9 serial (F), 1x DB9 serial (M)
RS-232 Interface (Receiver): 1x DB9 serial (M)
Power Supply: 24V DC (Sender), 5V DC (Receiver)
Power Consumption (Sender): 60 W (max.)
Power Consumption (Receiver): 10 W (max.)
Operating Temperature: 0 - 40 øC
Sender Dimensions: 43,434 cm W x 8,89 cm H x 11,43 cm D
Receiver Dimensions: 19,5 cm W x 3,302 cm H x 8,89 cm D
Shipping Weight: 7,3 kg
Certifications: UL (power supply), RoHS, CE


Package includes:

1x 8x CAT6 Extender for HDMI Sender unit
8x 8x CAT6 Extender for HDMI Receiver unit
8x HDMI input cables (1 m, M-M)
1x RS-232 Serial cable (M-F)
1x 24V DC Power Supply
8x 5V DC Locking Power Supply
1x Set of Rack Ears (Sender unit only)
1x User's Manual