EXT-WHDMI
|
Description
Wireless for HDMI (UWB Technology)/b>
EXT-WHDMI
Features:
The First Wireless HDMI Extender featuring Cable-Free High Definition Extension up to 9 meters.
The Gefen Wireless HDMI Extender is the perfect solution for sending up to three High Definition AV sources to any one location without the hassle of wires. The Gefen Wireless HDMI Extender is able to accomplish this by employing Ultra-Wideband (UWB) technology to send the large amounts of data required by the HDMI standard. Up to a 30 foot line-of-sight distance (less if going through a wall to an adjacent room) is achievable with supported resolutions of up to 1080p@30.
This is a perfect solution in scenarios where traditional cabling cannot be applied. The plug-and-play installation makes it simpler than ever to extend HDMI to another room or to a ceiling projector in a matter of minutes, all without ever having to run cables and drill through walls and ceilings.
The Gefen Wireless HDMI also doubles as a High Definition video switcher. There are three High Definition video inputs (2 HDMI and 1 Component) that are selectable by the transmitting unit.
If the wireless receiver is located in an remote location, the IR repeater feature will relay remote control commands from your location back to the source. Once the IR blaster is properly placed, simply pointing your existing remote control at the receiver will send the remote commands back to your AV source device(s) for a truly seamless experience.
Real-time, visually lossless HD video compression
Two HDMI inputs and one Component Video / Analog Audio input
Support for Dolby 5.1 Surround Sound
Fully HDMI and HDCP compliant
Supports HDMI 1.3 Lip Sync features for source devices
2-ch Audio and PCM @ 32KHz, 44.1KHz, 48KHz supported as well as multichannel compressed 5.1 audio
IR Blaster and IR Receiver jacks
Input Selector Switch
Tech. Spec.:
Frequency band range: 3.1 - 4.8 GHz
Resolutions: 480i, 480p, 720p, 1080i and 1080p@24Hz, 25Hz, and 30Hz
HDMI Version: HDMI v1.2a Compliant, HDMI 1.3 Compatible
CEC Compliancy: Consumer Electronics Control (CEC) compliant
Compression Type: ADI JPEG 2000 visual lossless compression
Operating temperature: 0 to 70 degrees C
Operating humidity: 10% to 90% relative humidity, non-condensing
Power Supply: 5V DC
Power Consumption: 12,5W max.
FCC Compliant: FCC Compliant Part 15
Dimensions: 15,24 cm W x 5,08 cm H x 10,16 cm D
Shipping Weight: 2,7 kg
Package includes:
1x Wireless HDMI Extender Sender unit
1x Wireless HDMI Extender Receiver unit
2x 5V DC / 2.5A Power Supplies
1x User's Manual
EXT-WHDMI
Features:
The First Wireless HDMI Extender featuring Cable-Free High Definition Extension up to 9 meters.
The Gefen Wireless HDMI Extender is the perfect solution for sending up to three High Definition AV sources to any one location without the hassle of wires. The Gefen Wireless HDMI Extender is able to accomplish this by employing Ultra-Wideband (UWB) technology to send the large amounts of data required by the HDMI standard. Up to a 30 foot line-of-sight distance (less if going through a wall to an adjacent room) is achievable with supported resolutions of up to 1080p@30.
This is a perfect solution in scenarios where traditional cabling cannot be applied. The plug-and-play installation makes it simpler than ever to extend HDMI to another room or to a ceiling projector in a matter of minutes, all without ever having to run cables and drill through walls and ceilings.
The Gefen Wireless HDMI also doubles as a High Definition video switcher. There are three High Definition video inputs (2 HDMI and 1 Component) that are selectable by the transmitting unit.
If the wireless receiver is located in an remote location, the IR repeater feature will relay remote control commands from your location back to the source. Once the IR blaster is properly placed, simply pointing your existing remote control at the receiver will send the remote commands back to your AV source device(s) for a truly seamless experience.
Real-time, visually lossless HD video compression
Two HDMI inputs and one Component Video / Analog Audio input
Support for Dolby 5.1 Surround Sound
Fully HDMI and HDCP compliant
Supports HDMI 1.3 Lip Sync features for source devices
2-ch Audio and PCM @ 32KHz, 44.1KHz, 48KHz supported as well as multichannel compressed 5.1 audio
IR Blaster and IR Receiver jacks
Input Selector Switch
Tech. Spec.:
Frequency band range: 3.1 - 4.8 GHz
Resolutions: 480i, 480p, 720p, 1080i and 1080p@24Hz, 25Hz, and 30Hz
HDMI Version: HDMI v1.2a Compliant, HDMI 1.3 Compatible
CEC Compliancy: Consumer Electronics Control (CEC) compliant
Compression Type: ADI JPEG 2000 visual lossless compression
Operating temperature: 0 to 70 degrees C
Operating humidity: 10% to 90% relative humidity, non-condensing
Power Supply: 5V DC
Power Consumption: 12,5W max.
FCC Compliant: FCC Compliant Part 15
Dimensions: 15,24 cm W x 5,08 cm H x 10,16 cm D
Shipping Weight: 2,7 kg
Package includes:
1x Wireless HDMI Extender Sender unit
1x Wireless HDMI Extender Receiver unit
2x 5V DC / 2.5A Power Supplies
1x User's Manual
Click here to fill in a rating for this item (after login)){kind=link}
Query on the Item?
Do you have any questions on this item?