EXT-3GSDI-2-HDMI1.3
|
Description
3G-SDI to HDMI1.3 Converter
EXT-3GSDI-2-HDMI1.3
Features:
The 3G-SDI to HDMI 1.3 Converter takes a 3G-SDI or single link HD-SDI signal and converts it to HDMI 1.3. Output resolutions of up to 1080p60 are supported. The 3G-SDI source is looped through to a dedicated 3G-SDI output and two L+R RCA-type analog audio output jacks for monitoring input audio.
Automatic EDID capture makes for effortless configuration of the HDMI output signal. With this feature enabled, options such as Color Space, Deep Color, and bit depth are automatically set.
Should troubleshooting be necessary, the 3G-SDI to HDMI 1.3 Converter generates a built-in pre-programmed test pattern which can be invoked at any time without a valid input.
Firmware programs can be upgraded in the field via the Converter's USB connector.
HDMI 1.3 Features Supported:
225 MHz Video Bandwidth
8-bit and 10-bit Deep Color
Up to 8 channels of SDI audio embedded into the HDMI output stream.
3G-SDI Modes Supported:
SDI Compliant (SMPTE 259M, up to 360 Mb/s)
HD-SDI Compliant (SMPTE 292M, up to 1.485 Gbps)
3G-SDI Compliant (SMPTE 494M/495M, up to 3.0 Gbps)
8-bit and 10-bit Support up to 225 MHz
1080p@50/59/60 Hz resolutions (Level A & B, SMPTE 425M)
Level B to A automatic conversion
A bank of DIP switches on the underside of the unit controls all major functions.
Max. image output resolution: 1920x1080/60 and 2K (2048x1080)
Firmware is USB upgradeable
8 DIP switches set all technical parameters (format conversion type, color space, HDMI sampling, test pattern, bit depth, etc)
SDI: Mirrors SDI input onto a reclocked buffered SDI output
SDI: Monitoring of SDI input source audio on analog L+R RCA connectors
SDI: Automatic Level-B to Level-A conversion for 1080p/50-60 video formats
SDI: Automatic detection of all SDI, HD-SDI, and 3G-SDI input formats
SDI Compliant to SMPTE 292M (HD-SDI), 259M (SDI), 296M, ITU-R BT.656 and ITU-R BT.601
SDI Compliant to 3G-SDI SMPTE 425-A and 425-B (formats 1080p @ 50/59.94/60 Hz)
HDMI Color Sampling: 4:2:2 and 4:4:4
HDMI: Pre-programmed color bar test pattern at 720p/60
HDMI support for YCbCr, RGB, 4:2:2, 4:4:4, and 8 to 10 bits depth
HDMI: Auto detects optimal monitor format with EDID
HDMI: Supports up to four (4) stereo 48-KHz audio streams
SDI bit depths of 8 and 10 bits on the input
Tech. Spec.:
Input Connector: (1) BNC female SDI/HD-SDI/3G-SDI
Input Connector: (1) Locking 5V DC power connector
Input Connector: (1) USB connector (for firmware upgrades)
Output Connector: (1) BNC female SDI/HD-SDI/3G-SDI (w/buffered input)
Output Connector: (1) HDMI 1.3 Type A 19-pin Male
Output Connectors: (2) L+R analog audio jacks (RCA-type)
Input Video Bandwidth: up to 3.0 Gbps (Single Link 3G-SDI)
Output Video Bandwidth: 225 MHz (Single Link HDMI 1.3)
SDI Compliant (SMPTE 259M, up to 360 Mb/s)
HD-SDI Compliant (SMPTE 292M, up to 1.485 Gbps).
3G-SDI Compliant (SMPTE 494M/495M, up to 3.0 Gbps)
Max. image output resolutions: 2K (2048x1080), 1920x1080/60
Power Supply: 5V DC locking type, 2.5W consumed each
Dimensions: 19,05 cm D x 20,828 cm W x 2,794 cm H
Rack Size: 1U (half-width)
Operating Temp.: 0-40 degrees C
HDMI 1.3 Compliant
Shipping Weight: 1,8 kg
Package includes:
1x 3G-SDI to HDMI 1.3 Converter
1x 5V DC Power Supply locking type
1x User's Manual
EXT-3GSDI-2-HDMI1.3
Features:
The 3G-SDI to HDMI 1.3 Converter takes a 3G-SDI or single link HD-SDI signal and converts it to HDMI 1.3. Output resolutions of up to 1080p60 are supported. The 3G-SDI source is looped through to a dedicated 3G-SDI output and two L+R RCA-type analog audio output jacks for monitoring input audio.
Automatic EDID capture makes for effortless configuration of the HDMI output signal. With this feature enabled, options such as Color Space, Deep Color, and bit depth are automatically set.
Should troubleshooting be necessary, the 3G-SDI to HDMI 1.3 Converter generates a built-in pre-programmed test pattern which can be invoked at any time without a valid input.
Firmware programs can be upgraded in the field via the Converter's USB connector.
HDMI 1.3 Features Supported:
225 MHz Video Bandwidth
8-bit and 10-bit Deep Color
Up to 8 channels of SDI audio embedded into the HDMI output stream.
3G-SDI Modes Supported:
SDI Compliant (SMPTE 259M, up to 360 Mb/s)
HD-SDI Compliant (SMPTE 292M, up to 1.485 Gbps)
3G-SDI Compliant (SMPTE 494M/495M, up to 3.0 Gbps)
8-bit and 10-bit Support up to 225 MHz
1080p@50/59/60 Hz resolutions (Level A & B, SMPTE 425M)
Level B to A automatic conversion
A bank of DIP switches on the underside of the unit controls all major functions.
Max. image output resolution: 1920x1080/60 and 2K (2048x1080)
Firmware is USB upgradeable
8 DIP switches set all technical parameters (format conversion type, color space, HDMI sampling, test pattern, bit depth, etc)
SDI: Mirrors SDI input onto a reclocked buffered SDI output
SDI: Monitoring of SDI input source audio on analog L+R RCA connectors
SDI: Automatic Level-B to Level-A conversion for 1080p/50-60 video formats
SDI: Automatic detection of all SDI, HD-SDI, and 3G-SDI input formats
SDI Compliant to SMPTE 292M (HD-SDI), 259M (SDI), 296M, ITU-R BT.656 and ITU-R BT.601
SDI Compliant to 3G-SDI SMPTE 425-A and 425-B (formats 1080p @ 50/59.94/60 Hz)
HDMI Color Sampling: 4:2:2 and 4:4:4
HDMI: Pre-programmed color bar test pattern at 720p/60
HDMI support for YCbCr, RGB, 4:2:2, 4:4:4, and 8 to 10 bits depth
HDMI: Auto detects optimal monitor format with EDID
HDMI: Supports up to four (4) stereo 48-KHz audio streams
SDI bit depths of 8 and 10 bits on the input
Tech. Spec.:
Input Connector: (1) BNC female SDI/HD-SDI/3G-SDI
Input Connector: (1) Locking 5V DC power connector
Input Connector: (1) USB connector (for firmware upgrades)
Output Connector: (1) BNC female SDI/HD-SDI/3G-SDI (w/buffered input)
Output Connector: (1) HDMI 1.3 Type A 19-pin Male
Output Connectors: (2) L+R analog audio jacks (RCA-type)
Input Video Bandwidth: up to 3.0 Gbps (Single Link 3G-SDI)
Output Video Bandwidth: 225 MHz (Single Link HDMI 1.3)
SDI Compliant (SMPTE 259M, up to 360 Mb/s)
HD-SDI Compliant (SMPTE 292M, up to 1.485 Gbps).
3G-SDI Compliant (SMPTE 494M/495M, up to 3.0 Gbps)
Max. image output resolutions: 2K (2048x1080), 1920x1080/60
Power Supply: 5V DC locking type, 2.5W consumed each
Dimensions: 19,05 cm D x 20,828 cm W x 2,794 cm H
Rack Size: 1U (half-width)
Operating Temp.: 0-40 degrees C
HDMI 1.3 Compliant
Shipping Weight: 1,8 kg
Package includes:
1x 3G-SDI to HDMI 1.3 Converter
1x 5V DC Power Supply locking type
1x User's Manual
Click here to fill in a rating for this item (after login)){kind=link}
Query on the Item?
Do you have any questions on this item?