EXT-DVI-2-RGBSS
|
Description
DVI to RGBS w/Scaler
EXT-DVI-2-RGBSS
Features:
The DVI to RGBS Scaler box takes your DVI-I computer video card/HDTV video signal and converts it to analog RGBS formats. Now you can display desktop or laptop computer and/or HDTV content on your analog RGBS display or projector. Available and selectable video formats include RGB, RGBS at sync 0.3V, RGBS at sync 5V, and YPbPr Component video.
Switching or adjusting the video formats is effortless with the optional infrared remote control. A button on the infrared remote control activates the friendly On-Screen Display (OSD) Menu System which allows you to adjust the video to your liking.
Note:
This device does not support HDCP.
VGA video can also be input to this device by using a VGA-to-DVI adapter (sold separately) on the DVI-I input side.
The input resolution is automatically detected while the output resolution and refresh rate can be selected through the OSD menu.
Output picture adjustments are possible on brightness, contrast, colour, RGB level and H-V position.
Supports HDTV resolution up to 1080p as input and output and computer resolutions up to 1920x1200 @ 60Hz.
The proprietary Advanced Color Engine technology gives: Brilliant and fresh colour, Intensified contrast and details, Vivid skin tone, Sharp edge, Accurate and independent colour control
Integrated 8-bit triple-ADC/PLL and high-performance frame rate conversion engine.
Dual 3-D motion video adaptive de-interlacers with smooth low-angle edge.
Automatic 3:2 pull-down & 2:2 pull-down detection and recovery.
Less then one frame delay allowing for gaming
Aspect ratio control for native and full view modes
Dual high quality scaling engines
Tech. Spec.:
DVI Bandwidth: 165MHz
RGBS Bandwidth: 350 Mhz
Single Link Range: 1080p/1920 x 1200
Input Video Signal: 1.2 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Output RGBS Connectors: type BNC x 4 plugs
Power Supply: 5V DC
Power Consumption: 10 watts (max)
Input DVI Connector: DVI-I 29 pin female
Dimensions: 13,208 cm W x 3,048 cm H x 15,24 cm D
Shipping Weight: 1,5 kg
Package includes:
1x DVI to RGBS Scaler
1x 5V DC Power Supply
1x 2 meter DVI-D M-M Cable
1x User's Manual
EXT-DVI-2-RGBSS
Features:
The DVI to RGBS Scaler box takes your DVI-I computer video card/HDTV video signal and converts it to analog RGBS formats. Now you can display desktop or laptop computer and/or HDTV content on your analog RGBS display or projector. Available and selectable video formats include RGB, RGBS at sync 0.3V, RGBS at sync 5V, and YPbPr Component video.
Switching or adjusting the video formats is effortless with the optional infrared remote control. A button on the infrared remote control activates the friendly On-Screen Display (OSD) Menu System which allows you to adjust the video to your liking.
Note:
This device does not support HDCP.
VGA video can also be input to this device by using a VGA-to-DVI adapter (sold separately) on the DVI-I input side.
The input resolution is automatically detected while the output resolution and refresh rate can be selected through the OSD menu.
Output picture adjustments are possible on brightness, contrast, colour, RGB level and H-V position.
Supports HDTV resolution up to 1080p as input and output and computer resolutions up to 1920x1200 @ 60Hz.
The proprietary Advanced Color Engine technology gives: Brilliant and fresh colour, Intensified contrast and details, Vivid skin tone, Sharp edge, Accurate and independent colour control
Integrated 8-bit triple-ADC/PLL and high-performance frame rate conversion engine.
Dual 3-D motion video adaptive de-interlacers with smooth low-angle edge.
Automatic 3:2 pull-down & 2:2 pull-down detection and recovery.
Less then one frame delay allowing for gaming
Aspect ratio control for native and full view modes
Dual high quality scaling engines
Tech. Spec.:
DVI Bandwidth: 165MHz
RGBS Bandwidth: 350 Mhz
Single Link Range: 1080p/1920 x 1200
Input Video Signal: 1.2 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Output RGBS Connectors: type BNC x 4 plugs
Power Supply: 5V DC
Power Consumption: 10 watts (max)
Input DVI Connector: DVI-I 29 pin female
Dimensions: 13,208 cm W x 3,048 cm H x 15,24 cm D
Shipping Weight: 1,5 kg
Package includes:
1x DVI to RGBS Scaler
1x 5V DC Power Supply
1x 2 meter DVI-D M-M Cable
1x User's Manual
Click here to fill in a rating for this item (after login)){kind=link}
Query on the Item?
Do you have any questions on this item?